Williamson Tool
& Engineering
Williamson Tool & Engineering continues to be a family-owned company, adding to its origins and 98 years of diverse history, with its capacities and dedication to remaining at the forefront of CNC technologies. Specialising in Precision Machining & Engineering using the latest in large CNC Milling, CNC Turning & CNC Horizontal Boring.
Since the company’s establishment, it has grown from a small engineering shop to one of the most extensive in Australia and is the home of some of the most technologically advanced equipment available.
Exciting Announcement
DCL Engineering Pty Ltd is excited and proud to announce the acquisition of Williamson Tool & Engineering.
The combination of these two-family companies, Williamson Tool & Engineering (WTE) started by Stuart Williamson’s father in the mid 1930’s along with DCL Engineering Pty Ltd (DCL) started by Bill Green in 1960 in Newtown NSW. These two companies have a long and proud history of servicing the Australian Mechanical and Engineering Industries.
Williamson Tool & Engineering will continue to run their High Quality – Large CNC machining services from their 22 Wendelbury rd. Chipping Norton premises. Williamson Tool & Engineering will now be a division of DCL Engineering Pty Ltd.
This acquisition generates a stronger organization to expand our company into the future. Providing larger capacities to be able to serve our customers and be competitive in a forever evolving Australian manufacturing marketplace,
With DCL’s newly increased capacity, we will be able to offer our clients complete in-house solutions that are not offered by any other workshop on the eastern seaboard in Australia under one company.
DCL can provide the following services over our four dedicated divisions. Fairfield East Head Office + Engineering & Machine shop. Port Kembla WG3# Transmission overhaul Facility, Newcastle NSS4# Site services & WTE at Chipping Norton Large CNC Machine shop.
Larger CNC Turning, Boring & Milling:
# CNC Horizontal Borer- HBM 5: – 4500mm cross travel * 3200mm vertical travel * 1800mm x 1600mm table * 20 tons CNC Rotary Table & capable of machining 5 axis simultaneously.
CNC Milling
Sachman CNC mill: – 8000mm long bed * 2100mm vertical travel * 1200mm cross travel.
CNC Milling
Sachman – T314 CNC Mill
- Machine travels
- X=3500mm
- Y=1400mm
- Z=1400mm with the 4th axis programable to 0.001 degrees, 800mm square with tailstock.
- (2500mm long shaft between axis and tailstock)
- Spindle S5000 fully programmable indexing Cosmo 3 head 0.02 degrees both planes full 3 axis 3D rotation.
CNC Turning
LFM lathe: – Swing 1800mm * 6000mm between centres* 1320mm over cross side * 20 Tons between centres (unsupported)
Your Contacts:
WTE @ Chipping Norton – Robert Hall (Sales / Estimating)
Office – 02 9754 1300
Mobile – 0414 472 992
Email – roberthall@dcleng.com.au
If you would like to find out more information about Williamson Tool & Engineering and our
services, please get in touch.
Williamson Tool & Engineering
22 Wendelbury Road
Chipping Norton NSW 2170
Australia